Showing posts with label Rocket Science Product Reviews. Show all posts
Showing posts with label Rocket Science Product Reviews. Show all posts

Saturday, 9 March 2013

Review of Rocket Science Elite Transition Bag


The photos below show the empty Rocket Science Transition Backpack, I think it is referred to as the Elite Bag. It is made of very light but extremely durable material. After a full season of use, it still looks brand new. Any dirt is easily brushed off and it doesn't even smell.

Now I have taken (an out of focus) photo of all the gear I take to a Sprint Triathlon. In hindsight I should done this when packing for the Half Ironman in Geelong (a lot more stuff), but you should still get the general idea.

So above we have runners, cycling shoes, thongs, wetsuit, helmet, sunnies, watch and HR monitor, towel, goggles, backup goggles, anti chafing cream, papaw cream and hair conditioner. The last two items are to assist getting the wetsuit off, which I'll discuss more if I ever get around to reviewing my wetsuit (love my wetsuit).  I don't take any nutrition with me to a Sprint Distance race. I find simple sports drink (usually Powerade) in my drink bottle on the bike is fine for a race that lasts just over an hour.

One half of the bag is devoted to storing your cycling shoes and runners. These are typically going to be the smelliest items (and runners are prone to getting dirty), so it is a good idea to isolate these away from everything else. As you can see in the photo below, I also put the anti chafing cream in with the shoes. There is plenty of room for heaps of other stuff in these compartments (the thongs are actually under the runners), but naturally you need to decide what you're happy to have stored with your shoes.


The other side of the bag has several layers of compartments. In the photo below you can see I have unzipped two mesh separators and also opened the wet item container.  The wet bag is fully waterproof and also contains any bad odours. I use this to carry my wetsuit, 2 pairs of goggles, papaw cream and hair conditioner. After the race, I can also add any dirty clothes to this bag as well

The wet bag is fully waterproof and also contains any bad odours. I use this to carry my wetsuit, 2 pairs of goggles, papaw cream and hair conditioner. After the race, I can also add any dirty clothes to this bag as well. And it is very easy to turn this bag inside out and for easier cleaning.

Below you can see the wet compartment with all my swimming gear just before a zip it up.


There is also room underneath the wet bag. The photo below shows the wet bag folded out with my towel sitting in the space below. If you look closely, you'll see 3 press studs that connect the wet bag. After the race, I detach it and only carry the wet bag into transition to collect all my stuff. The goggles, dirty towel and wetsuit all get shoved into the bag.

After folding the wet bag back inside and then zipping up the mesh divider, we come to the next section. In the photo below you can see special pouches for my sunnies and watch & HR monitor.

When I do Duathlons in Winter, I also put extra warm clothes into this layer (ie. cycling top, vest, arm warmers, gloves, etc) in case the weather is cold and/or wet for the race. However in this case, the overnight forecast was 20 degrees (68 farenheit), so warm clothes were not going to be needed (in hindsight I should have packed a hat).

The next photo shows this layer now zipped up and it is easy to see the two halves of the bag. Sometimes I'll even store stuff in this in-between section for easy access.

Once we zip the two halves together, we have a back pack. Despite it looking quite big, I still find it quite light even when fully packed.

We drive to most races and after parking I put this on my back and walk my bike to the race  venue.


The bag also has helmet and water bottle compartments demonstrated in the photos below. However my aero helmet is quite big and I typically just the wear the helmet and I usually put the water bottles on my bike as soon as I get it out of the car (so I won't forget later on). If we've parked a long way away, I'll ride to the race venue with the bag on my back. Although I typically hate riding with a back pack, this one sits snug and firm and is no problem, although my opinion may differ if I ride with it for over an hour.


In general I love this bag. In fact it was the purchase of a different Rocket Science Transition Bag for Elaine (the Messenger Bag version that I may get around to reviewing) that first brought the Rocket Science brand to our attention. Previously I would take 4 or 5 different bags as I wanted to keep everything separate, but this approach made it very different to transport stuff from the car - which probably explains why I have historically turned up to races very early to get a good parking spot.  Now everything fits neatly into one bag which is very easy to carry, plus I still get to keep everything separate as well - a perfect solution.

There are numerous other pockets on the outside to store all sorts of things, a mobile phone holder on the backpack straps, an MP3 player pocket with special ear phone cable hole. But to be honest I rarely use any of these extra features - it generally gets used as described above.

Wednesday, 22 August 2012

Review of the Rocket Science Race Belt


Race belts are used to hold race numbers, an alternative to attaching them to your top with safety pins. The photo to the right shows my new Rocket Science Race Belt holding the race number from the Duathlon on the weekend.

Most Short course Triathlons (Mini, Sprint & Olympic) do not use race numbers. Instead they rely on arm numbering. However nearly all Duathlons and Long Course Triathlons do have use race number bibs. In fact it is not unusual for the Long Course Triathlons to use two separate race number bibs - one for the bike leg and a different one for the run. The two race number bibs will have the same number, but advertise a different sponsor. In these races I need 2 race belts.

The next two photos show my previous two race belts. They are different styles with the Fuel Belt one using toggles and the other one using press studs - I've had problems with both.

The press studs can be very difficult to snap together through the race bib material. Generally you need to align the press stud exactly over the hole in the bib - but I always find the race bib is wider than the gaps between the press studs.

The toggles are extremely easy to attach, but not overly secure - I've lost one in a race. Through experience I've discovered you need to attach the bib rather loosely. If you push the toggles tight up against the belt, the elastic nature of the belt will end up creating too much force against the toggle and shoot it off. Again this is partly a problem of the positioning of the toggles not always matching up against the holes in the race bib. This isn't helped by the fact the belt is elastic, so the length of the gap will depend upon how much the belt is stretched.

Whenever using either of these race belts, I nearly always safety pin the bib to the belt because I simply do not trust the fasteners. Also, using safety pins and ignoring the fasteners allows me to better line up the width of the bib to the belt. But safety pins do not stretch with body movement, so there is still a chance the bib may rip and fall off.

The Rocket Science race belt uses rings to attach the bib. Not only are the rings far more secure, they are also moveable along the belt rather than being fixed in a set position. You can see from the photo that there is a red rubber patch that grips the ring to keep it in place, but you can also place the ring past this rubber patch.  This means I can get a perfect fit regardless of the race bib size. A better fit means that it will also be more aerodynamic when riding on the bike. Flapping clothes or race belts can be one biggest causes of extra drag.

But wait, there's more. As shown in the photo on the left, the Rocket Science race belt also has little loops that can carry gels. In the photo I've shown 3 gels attached to the belt, but it can hold up to the 6 gels. They are securely held, but easily removed by pulling down on the gel.

I have not tried to run with gels in the race belt yet, so cannot truly rate their effectiveness. However I suspect it will be far more convenient than carrying them in back pocket of my tri top. I don't carry gels on the run in Short Course races, but I definitely intend to utilize this feature when I race the Half Ironman at Geelong in February.

Thursday, 14 June 2012

Review of the Rocket Science Goggles

Rocket Science (Vostok)
Old Speedo goggles
Over the years I have collected a fair number of goggles. On the left is a picture of the new Rocket Science goggles. They are the Vostok model, I have no idea what Vostok means or stands for. I am currently using the Rocket Science goggles for my pool swimming, replacing the old Speedo goggles shown on the right.

In the pool I like to have my goggles fitting quite loose. A tight fit will often result in what Elaine calls the possum look - dark circles around the eyes (goggle imprints).  Having a loose fit increases the chances of them leaking and the older the goggle the more likely they are to leak as the rubber seal becomes less supple.

You'll notice the speedo goggles have much bigger rubber seals. I've found this style more suitable to wearing the goggles loose. However I've been wearing the Rocket Science goggles loose and so far not even a hint of leakage. It is unfair to compare them to the much older Speedo goggles, but I cannot remember the Speedo goggles being as comfortable and leak free even when they were brand new.
Finis Thunder

Engine
Last season I used Finis Thunder goggles (shown on the left) for my open water swims and races. I wear my goggles a little tighter when swimming in open water. You don't want to be stopping to adjust leaky goggles in a race and the open water swims are often a shorter duration than pool swims, so less risk of possum eyes. The Finis goggles are designed for racing and have less rubber in their seals and fit a little smaller - less chance of being knocked off my other swimmers. I bought the Finis goggles to replace my Engine goggles (shown above right) for open water swims. The Engine goggles are a similar racing style, but the big advantage of the Finis ones was that they are clear all over allowing better vision. There are no lane lines in open water, so sighting becomes very important. With the entire goggle being clear I found my vision while swimming was much improved.
Comparison of Finis & Rocket Science

On the right is a comparison photo that shows the Rocket Science goggles I'm using in the pool are almost exactly the same style as the Finis goggles I use for racing and open water swims. While I love the Finis goggles in the open water, I find they don't work as well in the pool - not as good with a loose fit. Whereas the Rocket Science goggles have been the best I've ever used in the pool.

I received this pair of Rocket Science goggles for free as part of my XOSIZE, Rocket Science Ambassador Program, but I'll definitely be buying more pairs (with my own money). They are the most comfortable and leak free goggles I have ever used. They come in the smaller racing style shape I prefer, but are also excellent in the pool. Due to it being Winter, I haven't tested them in the open water yet. I suspect the biggest issue might be visibility, but hopefully there will be different versions available to address this.